REFERENCIAS

[1] AUSTROADS AP-R168, Weigh in Motion Technology. Sidney 2000.

[2] FABELA, Manuel; HERNANDEZ, José. “Diseño y Construcción de un Prototipo para Determinar el Peso de Vehículos Ligeros en Movimiento”. Sanfandila, Qro. México 2004, Paper Conferencia CERMA. 2008.

[3] CURTIS Berthelot, A.T. Bergan, Norm Lindgren, Bob Woytowich. “Preserving Highway Infrastructure Using Weigh-In-Motion (WIM)”, University of Saskatchewan, Saskatoon, Canada, November 1998.

[4] MCCALL, Bill; MAZE Tom. “Weigh-in-Motion Project and Handbook”. Center for Transportation Research and Education”, Estados Unidos. 1998.

[5] BUSHMAN Rob, PRATT Andrew J. “Weigh In Motion Technology - Economics and Performance”, Charlotte, North Carolina, 1998.

[6] MARTIN Peter T. Detector Technology Evaluation. Associate Professor University of Utah, Department of Civil and Environmental Engineering University of Utah Traffic Lab. November 2003.

[7] G. Yannis and C. Antoniou, “Integration of weigh-in-motion technologies in road infrastructure management,” ITE Journal, Vol. 75, No. 1, pp. 39-43, January, 2005.

[8] MALLA Ramesh B., SEN Amlan, GARRICK Norman W. "A Special Fiber Optic Sensor for Measuring Wheel Loads of Vehicles on Highways," Department of Civil & Environmental Engineering, University of Connecticut, Storrs, Connecticut, U.S.A. 2008.

[9] C.R. LIU, L. Guo, J. Li, X. Chen, Weigh-in-Motion (WIM) Sensor Based on EM Resonant Measurements. Dept. of Electrical and Computer Engineering, University of Houston, Houston, Texas, United States. 2007.

[10] STEWART P.M., New Sensors For Axle Detection and Weigh In Motion. La Trobe University, Australia. 1989.

[11] KOENDERINK Ron, P. Eng., Shari Dunlop, B.Sc. (Eng.), Curtis Berthelot, Ph.D, P. Eng. Photo Weigh In Motion: Concepts and Applications. International Road Dynamics Inc, University of Saskatchewan. Saskatoon, Canada. 2000.

[12] WANG, Jinfang; WU, Mingguang. An Overview of Research on Weigh-in-motion System. Zhejiang University. Institute of Industrial Process Control. IEEE paper #01343721, 2004.

[13] CHOU Chia-Pei, CHEN Yi-hsien, CHEN I-Chan. Integrating Weigh-In-Motion And Electronic Toll Collection For Commercial Vehicle Operation In Taiwan. Department of Civil Engineering, National Taiwan University, No.1, Sec.4, Roosevelt Rd., Taipei 106, Taiwan, R.O.C., Journal of The Institution of Engineers, Singapore Vol. 44, Issue 2 2004.

[14] BUSHMAN Rob, BERTHELOD Curtis, TAYLOR Brian. Commercial Vehicle Loading in an Urban Environment. International Road Dynamics Inc, University of Saskatchewan. Saskatoon, Canada 2003.

[15] GU Zhongren, HAN Lee D. Evaluation of Dynamic Weight Threshold Algorithm for WIM Operations Using Simulation. Proceedings of the 83rd TRB Annual Meetings CD, Washington, DC, 2004.

[16] SARAH K. Leming, STALFORD Harold L., “Bridge weigh-in-motion system development using static truck/dynamic bridge models”, University of Oklahoma, May 2002.

[17] Técnicas de Gestión del Tráfico, Sistema de Pesaje Dinámico a Alta Velocidad, KINEO Ingeniería Informática y Electrónica. Valladolid, España.

[18]. HALIMIC, M.; BALACHANDRAN, W. Kalman Filter for Dynamic Weighing System. University of Surrey. 2000. IEEE paper #00497286.

[19]. HALIMIC, M.; BALACHANDRAN, W.; ENAB, Y. Fuzzy Logic Estimator for Dynamic Weighing System. M & E S Department, Brunel University (U.K). 1996. IEEE paper #00552791.

[20]. ALMODARRESI Yasin, S.M.T.; WHITE, N.M. Application Of Artificial Neural Networks To Intelligent Weighing Systems. 1999. IEEE paper #00815882.

[21]. DOLCEMASCOLO, Victor; MANGEAS, Morgan; GLASER, Sebastien. Neural Networks Estimation Of Truck Static Weights By Fusing Weight-In-Motion Data. LIVIC (Laboratoire sur les interactions véhicules, infrastructures, conducteurs). 2002.
IEEE paper #01021190.

[22]. FUKUDA, K.; TOTTORI, H.; KAMEOKA, K.; ONO, T.; YOSHIDA, K. A Method for Estimating Axle Weights of In-motion Vehicles and Its Evaluation. Oyo Measurement Co.Ltd, Hanshin Expressway Public Corporation, Himeji Institute of Technology, Okayama University of Science y Okayama Prefectural University. 2002.
IEEE paper #01195309.

[23]. FUJIMOTO, Shinsaku; ONO, Toshiro; WANG, Zhongyu; OHSAKA, Kazumasa. Evaluation of an In-Motion Vehicle Weighing Method via Grey Estimation Model. Okayama University of Science, Luoyang Institute of Technology. IEEE paper #01195311. 2002.

[24]. http://cordis.europa.eu/cost-transport/src/cost-323.htm.

[25]. http://www.alcaldiabogota.gov.co/sisjur/normas/Norma1.jsp?i=15600

[26]. KATZ, Bryan J. Field and Modeling Framework for Evaluating Truck Weigh Station Operations, Faculty of the Virginia Polytechnic Institute and State University, December 2001.